service-policy (control plane)

Binds a policy map as a service policy for receive ACL (RACL) IPv4 and IPv6 inbound traffic to the control plane.

Syntax

service-policy in policy-mapname

no service-policy in

No service policy is created.

Control-plane configuration mode

The policy map must be configured before you can apply it (refer to the description of the policy-map command).

The no form of this command removes the service-policy map from the control plane.

The following example applies a policy map as a service policy to the control plane.

device# configure terminal
device(config)# control-plane
device(conf-control-plane)# service-policy in policymap1

The following example removes a policy map from the control plane.

device# configure terminal
device(config)# control-plane
device(conf-control-plane)# no service-policy in