tx-interval

Configures the transmission interval.

Syntax

tx-interval tx-interval

no tx-interval

Parameters:

tx-interval: Specifies the transmission interval in seconds. Valid values can be 1, 10, 60, or 600 seconds.

Command Default

The default value for tx interval is 1 second.

Modes

Y1731 configuration mode

Usage Guidelines

Use the no form of the command to delete the transmission interval configuration.

Examples

This example shows how to configure the transmission interval.

configure terminal
device (config-cfm)# prtocol cfm
device (config-cfm)# y1731
device(config-cfm-y1731)# test-profile my_test_profile
device(config-cfm-y1731-test-profile-my_test_profile)# type delay-measurement
device(config-cfm-y1731-test-profile-my_test_profile)# tx-interval 60