show ipv6 pim rpf

Displays the Reverse Path Forwarding (RPF) for a specified address.

Syntax

show ipv6 pim rpf src-ipv6-addr [grp-ipv6-addr]

Parameters

src-ipv6-addr
Specifies the IPv6 source or RP address for RPF.
grp-ipv6-addr
(Optional) Specifies the IPv6 group address.

Modes

Privileged EXEC mode

Usage Guidelines

This command displays the port that PIM regards as the best reverse path for the specified address.

Examples

This example shows typical output for the command.

device# show ipv6 pim rpf 1234:32
upstream nbr fe80::2e0:cff:fe03:a on Eth 0/8
9036689-01 Rev AA