show ipv6 pim bsr

Displays bootstrap router (BSR) information.

Syntax

show ipv6 pim bsr

Modes

Privileged EXEC mode

Usage Guidelines

This command displays BSR information, including whether the PIM router is the elected or candidate BSR. It also displays information about the candidate rendezvous point (RP).

Examples

The following example shows typical output for the command.

device# show ipv6 pim bsr
PIMv2 Bootstrap information :
------------------------------------------------------------------
  This system is the Elected BSR
  BSR address: 1234::5. Hash Mask Length 32. Priority 0.
  Next bootstrap message in 00:00:50
  Configuration:
    Candidate Lo 1 (Address 1234::5). Hash Mask Length 32. Priority 0.
Next Candidate-RP-advertisment in 00:00:50
  RP: 1234::5
    group prefixes:
    ff08:: / 16
    ff05:: / 16
  Candidate-RP-advertisement period: 60