ip igmp snooping query-max-response-time

Sets the IGMP snooping query maximum response time.

Syntax

ip igmp snooping query-max-response-time seconds

no ip igmp snooping query-max-response-time seconds

Command Default

The maximum response time is enabled by default with a value of 10 seconds.

Parameters

seconds: Specifies the IGMP snooping query maximum response time in seconds. The range is 1-25 seconds.

Modes

VLAN configuration mode

Usage Guidelines

The IGMP snooping query maximum response time is the number of seconds that a device wait sfor an IGMP (V1 or V2) response from an interface before concluding that the group member on that interface is down and removing it from the group.

Examples

The following example sets the IGMP snooping query max response time.

device(config)# vlan 1
device(config-Vlan-1)# ip igmp snooping query-max-response-time 15