View the OSPF Timer Information

Display OSPF timers information to ensure accuracy.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View the OSPF timers information:

    show ip ospf int-timers [vrf WORD<1-16>] [vrfids WORD<0-512>]

Example

Switch:1#show ip ospf int-timers

================================================================================
                      OSPF Interface Timer - GlobalRouter
================================================================================
                                TRANSIT  RETRANS  HELLO    DEAD     POLL
INTERFACE       AREAID          DELAY    INTERVAL INTERVAL INTERVAL INTERVAL
--------------------------------------------------------------------------------
192.0.2.1       0.0.0.0         1        5        10       40       120
192.0.2.11      0.0.0.0         1        5        10       40       120
192.0.2.3       0.0.0.0         1        5        10       40       120

================================================================================
                          Ospf Virtual Interface Timer
================================================================================
                                TRANSIT  RETRANS  HELLO    DEAD
AREAID          NBRIPADDR       DELAY    INTERVAL INTERVAL INTERVAL
--------------------------------------------------------------------------------

Variable definitions

The following table defines parameters for the show ip ospf int-timers command.

Variable

Value

vrf WORD<1-16>

Specifies a VRF by name.

vrfids WORD<0-512>

Specifies a range of VRF IDs.