Show the EAPoL Status of the Device

Display the current device configuration.

Note

Note

Use the clear-stats command to clear EAP or NEAP statistics.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the current device configuration by using the following command:

    show eapol system

Example

Switch:1>show eapol system
=================================================================
                                  Eapol System
=================================================================
                     eap : disabled
           Eapol Version : 3
         non-eap-pwd-fmt : mac-addr
     non-eap-pwd-fmt key : ******
 non-eap-pwd-fmt padding : disabled
 auto-isid-offset status : disabled
 auto-isid-offset value  : 1000