View the Protocol Directory

About this task

View the protocol directory to see the list of protocols that RMON2 can monitor. You cannot change the list of protocols.

The protocol directory MIB is enabled by default for the predefined protocols.

Procedure

  1. In the navigation pane, expand Configuration > Serviceability > RMON.
  2. Select Protocol Directory.
  3. Select the Protocol Directories tab.

Protocol Directories Field Descriptions

The following table defines parameters for the Protocol Directories tab.

Name

Description

Index

Shows a unique identifier for the entry in the table.

Protocol

Shows the protocols RMON2 can monitor:

  • Internet Protocol (IP)

  • Secure Shell version 2 (SSHv2)

  • Transmission Control Protocol (TCP)

  • User Datagram Protocol (UDP)

  • File Transfer Protocol (FTP)

  • Hypertext Transfer Protocol (HTTP)

  • Telnet

  • Remote login (rlogin)

  • Trivial File Transfer Protocol (TFTP)

  • Simple Networking Management Protocol (SNMP)

Note:

RMON2 can count application packets received on a platform, even if the application is not enabled or supported, before dropping them.

AddressMapConfig

Describes and configures the probe support for the network layer and application layer host tables for this protocol. The value can be one of the following:

  • notSupported

  • supportedOff

  • supportedOn

If the value is supportedOn, the probe adds entries to the Address Map tab that maps the network layer address to the MAC layer address.

HostConfig

Describes and configures the probe support for the network layer and application layer host tables for this protocol. The value can be one of the following:

  • notSupported

  • supportedOff

  • supportedOn

If the value is supportedOn, the probe adds entries to the Host Control tab to collect statistics for network layer and application layer hosts.

MatrixConfig

Describes and configures the probe support for the network layer and application layer host tables for this protocol. The value can be one of the following:

  • notSupported

  • supportedOff

  • supportedOn

Owner

Shows the entity that configured this entry.