View OSPF Error Statistics on a Port

Use statistics to help you monitor Open Shortest Path First (OSPF) performance. You can also use statistics in troubleshooting procedures.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display extended information about OSPF errors for the specified port or for all ports:

    show interfaces GigabitEthernet error ospf [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

Variable Definitions

The following table defines parameters for the show interfaces GigabitEthernet error ospf command.

Variable

Value

{slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.