View BGP Route Summary

Display BGP route summary.

Before you begin

  • To perform this procedure on a non-default VRF, you must first change the VRF instance. For information about how to use EDM for a non-default VRF, see Select and Launch a VRF Context View. All parameters might not be available in non-default VRFs.

  • The VRF must have an RP trigger of BGP.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select BGP.
  3. Select the Bgp Route Summary tab.

Bgp Route Summary Field Descriptions

Use the data in the following table to use the Bgp Route Summary tab.

Name

Description

Prefix

Configures the IP address of the route.

PrefixLen

Specifies the IP address and the mask length (the length can be 0–32).

LocalAddr

Specifies the local IP address of the entered BGP route.

RemoteAddr

Specifies the remote IP address of the entered BGP route.