Display the MSDP Summary

Use the following procedure to display the MSDP global and peer status.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display the MSDP summary:

    show ip msdp summary [vrf WORD<0-16>] [vrfids WORD<0-512>]

Example

Switch:#enable
Switch:1#show ip msdp summary
============================================================================
                          MSDP Summary - GlobalRouter 
============================================================================
MSDP Status Summary
   MSDP Global Status: enabled
cache status: enabled
cache-lifetime: 390 seconds
cache-count: 8
Originator id: 5.5.5.5
Redistribute: route-policy:
SA Limit: 6144

MSDP Peer Status Summary

Peer Address AS State       Uptime/  Established SA
                            Downtime Count       Count
4.5.35.3     1  Established 00:00:27 3           8
5.7.56.7     2  Established 00:00:31 2           0

Variable definitions

The following table defines parameters for the show ip msdp summary command.

Variable

Value

vrf WORD<0–16>

Displays configuration information for a particular VRF.

vrfids WORD<0–512>

Displays configuration information for a particular VRF ID.