Show RADIUS Server Statistics

About this task

Use the server statistics feature to display the number of input and output packets and the number of input and output bytes. Statistics from console ports are available to assist with debugging.

Procedure

  1. In the navigation pane, expand Configuration > Security > Control Path.
  2. Select RADIUS.
  3. Select the RADIUS Servers Stats tab.

RADIUS Server Stats Field Descriptions

Use the data in the following table to use the RADIUS Server Stats tab.

Name

Description

AddressType

Specifies the type of IP address. RADIUS supports IPv4 addresses only.

Address

Shows the IP address of the RADIUS server.

Used by

Identifies the client.

AccessRequests

Shows the number of access-response packets sent to the server; does not include retransmissions.

AccessAccepts

Shows the number of access-accept packets, valid or invalid, received from the server.

AccessRejects

Shows the number of access-reject packets, valid or invalid, received from the server.

BadResponses

Shows the number of invalid access-response packets received from the server.

PendingRequests

Shows the access-request packets sent to the server that have not yet received a response or that have timed out.

ClientRetries

Shows the number of authentication retransmissions to the server.

AcctOnRequests

Shows the number of accounting on requests sent to the server.

AcctOffRequests

Shows the number of accounting off requests sent to the server.

AcctStartRequests

Shows the number of accounting start requests sent to the server.

AcctStopRequests

Shows the number of accounting stop requests sent to the server.

AcctInterimRequests

Number of Accounting Interim requests sent to the server.

Important:

The AcctInterimRequests counter increments only if you select AcctIncludeCli from the RADIUS Global tab.

AcctBadResponses

Shows the number of Invalid responses discarded from the server.

AcctPendingRequests

Shows the number of requests waiting to be sent to the server.

AcctClientRetries

Shows the number of retries made to this server.

RoundTripTime

Shows the time difference between the instance when a RADIUS request is sent and the corresponding response is received.

AccessChallenges

Shows the number of RADIUS access-challenges packets sent to this server. This does not include retransmission.

NasIpAddress

Shows the RADIUS client NAS Identifier for this server.