Configure an ACE IPv6 Next Header
Configure ACE IPv6 next header entries to have the filter look for specific next headers.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation pane, expand .
- Select Advanced Filters (ACE/ACLs).
- Select the ACL tab.
- Select the appropriate ACL.
- Select ACE.
- Select the appropriate ACE.
- Select IPv6.
- Select the Next Hdr tab.
- Select Insert.
- In the Oper field, select the operation type.
- In the NextHdr field, select the next header type.
- Select Insert.
Next Header Field Descriptions
Use the data in the following table to use the Next Hdr tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. |
|
AceId |
Specifies the ACE ID. |
|
Oper |
The eq parameter specifies an operator for an “equal to” field match condition. |
|
NextHdr |
Specifies the next header of the IPv6 header. Specifies hop-by-hop, tcp, udp, routing, fragment, ipsecESP, ipsecAH, icmpv6, noNxtHdr, or undefined. |