Configure an NTP Address for the DHCP Server

Use this procedure to configure an NTP address for the DHCP Server to advertise to clients.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select DHCP Server.
  3. Select the Global NTP tab.
  4. Select Insert.
  5. In IP Address, type the IPv4 address of the NTP server.
  6. Select Insert.

Global NTP Field Descriptions

Use the data in the following table to use the Global NTP tab.

Name Description

IP Address

Specifies the IPv4 address of the NTP server. You can enter a maximum of eight DNS servers.

Origin

Specifies the origin of DHCP Server configuration, either manually configured through CLI or EDM, or dynamically configured through RADIUS.