View Basic OSPF Statistics for a Brouter Port

Use statistics to help you monitor Open Shortest Path First (OSPF) performance. You can also use statistics in troubleshooting procedures.

About this task

This command provides values for brouter port implementations. For IP protocol-based VLAN interface statistics, use View the OSPF Interface Statistics.

Procedure

To enter User EXEC mode, log on to the switch.
View basic OSPF statistics:

show ports statistics ospf main [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

Example

View basic OSPF statistics:

Switch:1>enable
Switch:1#show ports statistics ospf main

================================================================================
                                Port Stats Ospf
================================================================================
PORT_NUM RX_HELLO   TX_HELLO   RXDB_DESCR TXDB_DESCR RXLS_UPDATE   TXLS_UPDATE
--------------------------------------------------------------------------------
1/3      0          0          0          0          0             0

Variable Definitions

Use the data in the following table to use the show ports statistics ospf main command.


Variable	Value
{slot/port[/sub-port][-slot/port[/sub-port]][,...]}	Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.