Configure the Rapid Spanning Tree Protocol Version

Perform this procedure to specify the RSTP mode.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Configure Rapid Spanning Tree Protocol version:

    spanning-tree rstp version {rstp|stp-compatible}

Example

Configure Rapid Spanning Tree Protocol version:

Switch:1(config)# spanning-tree rstp version rstp

Variable Definitions

Use the data in the following table to use the spanning-tree rstp version command.

Variable

Value

rstp version {rstp|stp-compatible}

Sets the version to RSTP or to STP compatible.

The default is RSTP.