View the OSPF Interface Statistics
Use statistics to help you monitor OSPF performance.
Procedure
Example
View the OSPF interface statistics:
Switch:1#show ip ospf ifstats ================================================================================ OSPF Interface Statistics - GlobalRouter ================================================================================ ---HELLOS---- ---DBS--- -LS REQ-- --LS UPD--- --LS ACK--- INTERFACE RX TX RX TX RX TX RX TX RX Tx -------------------------------------------------------------------------------- 192.0.2.3 76035 76355 33 32 4 9 2483 2551 2525 1247 192.0.2.8 76038 76349 0 0 0 0 0 0 0 0
Variable definitions
The following table defines parameters for the show ip ospf ifstats command.
Variable |
Value |
---|---|
<1-4059> |
Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1. |
detail |
Displays the details of the OSPF. |
mismatch |
Specifies the number of times the area ID is not matched. |
vrf WORD<1-16> |
Specifies a VRF by name. |
vrfids WORD<0-512> |
Specifies a range of VRF IDs. |