Modify Ingress 802.1p to QoS Mappings

About this task

Modify the ingress mappings to change traffic priorities. As a best practice, use the default mappings.

Do not change the default values. If you change the values, make sure that the values are consistent on all other devices in the network. Inconsistent mapping of table values can result in unpredictable service levels.

Procedure

  1. In the navigation pane, expand Configuration > QOS.
  2. Select Mapping Tables.
  3. Select the Ingress 8021p to QoS tab.
  4. Double-click a QosLevel to change the value.
  5. Select Apply.

Ingress 8021p To QoS Field Descriptions

Use the data in the following table to use the Ingress 8021p To QoS tab.

Name

Description

InIeee8021P

Specifies the value of the IEEE 802.1p bit of the incoming packet.

QosLevel

Specifies the equivalent egress QoS level (0–7).