View ACL Statistics

About this task

Graph statistics for a specific ACL ID to view default statistics.

Procedure

In the navigation pane, expand Configuration > Security > Data Path.
Select Advanced Filters (ACE/ACLs).
Select the ACL tab.
Select an ACL.
Select Graph.
Optional: Select Clear Counters to clear the fields.

Statistics Field Descriptions

Use the data in the following table to use the Statistics tab.

Note

Based on your hardware platform, the output can display the ACL packets by ACE type or Primary Bank or Secondary Bank.


Name	Description
AclId	Specifies the ACL ID.
MatchDefaultPrimaryBankPkts	Shows a Primary Bank packet count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.
MatchDefaultPrimaryBankOctets	Shows a Primary Bank byte count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.
MatchDefaultSecondaryBankPkts	Shows a Secondary Bank packet count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.
MatchDefaultSecondaryBankOctets	Shows a Secondary Bank byte count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.
MatchGlobalPrimaryBankPkts	Shows a Primary Bank packet count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.
MatchGlobalPrimaryBankOctets	Shows a Primary Bank byte count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.
MatchGlobalSecondaryBankPkts	Shows a Secondary Bank packet count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.
MatchGlobalSecondaryBankOctets	Shows a Secondary Bank byte count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.
DefaultGreenBytes	Shows byte count of traffic sent with a rate lower than committed-rate matching any of the ACE rules or hits on Default Action.
DefaultGreenPackets	Shows packet count of traffic sent with a rate lower than committed-rate matching any of the ACE rules or hits on Default Action.
DefaultYellowBytes	Shows byte count of traffic sent with a rate lower than peak-rate and higher than committed-rate matching any of the ACE rules or hits on Default Action.
DefaultYellowPackets	Shows packet count of traffic sent with a rate lower than peak-rate and higher than committed-rate matching any of the ACE rules or hits on Default Action.
DefaultRedBytes	Shows byte count of traffic sent with a rate higher than peak-rate matching any of the ACE rules or hits on Default Action.
DefaultRedPackets	Shows packet count of traffic sent with a rate higher than peak-rate matching any of the ACE rules or hits on Default Action.