Modify Egress QoS to DSCP Mappings
About this task
Modify the egress QoS to DSCP mappings to change traffic priorities. As a best practice, use the default mappings.
Do not change the default values. If you change the values, make sure that the values are consistent on all other devices in the network. Inconsistent mapping of table values can result in unpredictable service levels.
Procedure
- In the navigation pane, expand .
- Select Mapping Tables.
- Select the Egress QoS To Dscp tab.
- Double-click OutDscp to change the value.
- Select Apply.
Egress QoS To Dscp Field Descriptions
Use the data in the following table to use the Egress QoS To Dscp tab.
|
Name |
Description |
|---|---|
|
QosLevel |
Specifies the QoS level of the outgoing packet. |
|
OutDscp |
Specifies the equivalent value of the DiffServ code point (in decimal format). |
|
OutDscpBinaryFormat |
Specifies the equivalent value of the DiffServ code point (in binary format). |