Create the Forwarding Profile

About this task

A forwarding profile is a collection of port and destination pairs. When you configure UDP forwarding list entries, be sure to first configure the UDP forwarding list. Then, configure your UDP forwarding list entries and assign them to a UDP forwarding list. If you do not assign a UDP forwarding list entry to at least one UDP forwarding list, the UDP forwarding list is lost after a restart.

Procedure

In the navigation pane, expand Configuration > IP.
Select UDP Forwarding.
Select the Forwarding Lists tab.
Select Insert.
In Id, type the forwarding list ID.
Optional: In Name, type the name of the forwarding list, if required.

The system displays the forwarding list in FwdIdList.
Select Insert.

Forwarding Lists Field Descriptions

Use the data in the following table to use the Forwarding Lists tab and Insert Forwarding Lists dialog box.


Name	Description
Id	Specifies a value that uniquely identifies this list of entries (1 to 1000).
Name	Specifies an administratively assigned name for this list (0 to 15 characters).
FwdIdList	Specifies the zero or more port forwarding entries associated with this list. Each list identifier is stored as 2 bytes in this array, starting from 0 bytes (size=64). Select the ellipsis (...) to display the ID list.