Configure Target Table Parameters
About this task
Configure the target table to configure the security parameters for SNMP. Configure the target table to configure parameters such as SNMP version and security levels.
Procedure
- In the navigation pane, expand .
- Select Target Table.
- Select the Target Params Table tab.
- Select Insert.
- In Name, type a target table name.
- From MPModel, select an SNMP version.
- From Security Model, select the security model.
- In SecurityName, type readview or writeview.
- From SecurityLevel, select the security level for the table.
- Select Insert.
Target Params Table Field Descriptions
Use the data in the following table to use the Target Params Table tab.
|
Name |
Description |
|---|---|
|
Name |
Identifies the target table. |
|
MPModel |
Specifies the message processing model to use to generate messages: SNMPv1, SNMPv2c, or SNMPv3/USM. |
|
SecurityModel |
Specifies the security model to use to generate messages: SNMPv1, SNMPv2c, or USM. You can receive an inconsistentValue error if you try to configure this variable to a value for a security model that the implementation does not support. |
|
SecurityName |
Identifies the principal on whose behalf SNMP messages are generated. |
|
SecurityLevel |
Specifies the security level used to generate SNMP messages: noAuthNoPriv, authNoPriv, or authPriv. |