Display IPFIX Collector Information

About this task

Use the following procedure to display information about the IPFIX collector. The IPFIX collector can store flow information from multiple network devices.

Procedure

To enter User EXEC mode, log on to the switch.
Display information about the IPFIX collector:

show ip ipfix collector [<1–1>]

Example

==================================================================================================================

                                                  IPFIX Collector-Info

==================================================================================================================

ID   Collector         Exporter          Source   Destination   Collector   Reachable         Exporting   Initial

     IP Address        IP Address        Port     Port          State       Via               Interval    Burst

------------------------------------------------------------------------------------------------------------------

1    20.20.20.2        20.20.20.1        2055     2055          Enabled     -                 60          5

Variable Definitions

Use the data in the following table to use the show ip ipfix collector command.


Variable	Value
<1–1>	Specifies the IPFIX collector ID.