Configure LST

About this task

Use this procedure to configure LST groups.

Procedure

  1. In the navigation pane, expand Configuration > Edit.
  2. Select Link State Tracking
  3. Select the Link State Tracking tab.
  4. Select a GroupId row to configure.
  5. To add upstream ports to the LST group, double-click UpstreamPortList, select the upstream ports to add, and then select OK.
  6. To add downstream ports to the LST group, double-click DownstreamPortList, select the upstream ports to add, and then select OK.
  7. To add an upstream MLT to the LST group, double-click UpstreamMltList, and then type an upstream MLT ID.
  8. To add a downstream MLT to the LST group, double-click DownstreamMltList, and then type an upstream MLT ID.
  9. To enable an LST group, double-click Enabled, and then select true.
  10. To activate the LST group configuration, select Apply.
  11. View the OperState of the LST groups to verify the current operating state.

Link State Tracking Field Descriptions

Use the data in the following table to use the Link State Tracking tab.

Name

Description

GroupId

Specifies the LST group number between 1 and 48.

Enabled

Specifies if the LST group is enabled. Values are true or false. Default is false.

UpstreamPortList

Specifies upstream interface ports in the LST group.

DownstreamPortList

Specifies downstream interface ports in the LST group.

UpstreamMltList

Specifies an upstream multi-link trunk in the LST group.

DownstreamMltList

Specifies a downstream multi-link trunk in the LST group.

OperState

Displays the current operating status of the LST group. Values are up, down, or notConfigured.