View Level 1 Remote Area Information

About this task

Perform this procedure to display Level 1 remote area information. Remote Intermediate-System-to-Intermediate-System (IS-IS) provides support for hierarchical routing, which enables the system to partition large routing domains into smaller areas. Remote IS-IS uses a two-level hierarchy, dividing the domain into multiple Level 1 areas and one Level 2 area. The Level 2 area serves as backbone of the domain, connecting to all the Level 1 areas.

Important

Important

The IEEE 802.1aq standard currently only defines the use of one hierarchy, Level 1. Level 2 function is disabled.

Procedure

  1. In the navigation pane, expand Configuration > Fabric.
  2. Select IS-IS Remote.
  3. Select the L1 Area tab.

L1 Area Remote Field Descriptions

Use the data in the following table to use the L1 Area Remote tab.

Name

Description

AreaAddr

Specifies an area address reported in a Level 1 link-state packets (LSP) that the system generates or receives through the Intermediate System.