Display the SA Cache
Use the following procedure to display the (S,G) state learned from MSDP peers and the local (S,G) state. The local (S,G) is the SPB (S,G) sent to MSDP.
Procedure
Example
Switch:#enable Switch:1#show ip msdp sa-cache local ============================================================================ MSDP Foreign SA Cache - GlobalRouter ============================================================================ MSDP Source-Active Foreign Cache - 8 entries (2.10.1.100, 224.5.5.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.10.1.100, 224.5.6.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.10.1.100, 224.5.7.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.10.1.100, 224.5.8.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.11.2.100, 224.6.5.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.11.2.100, 224.6.6.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.11.2.100, 224.6.7.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 (2.11.2.100, 224.6.8.0), RP 3.3.3.3, BGP/AS 1, 00:01:53/00:05:35 Switch:1#show ip msdp vrf msdpvrf ============================================================================ MSDP Local SA Cache – VRF msdpVrf ============================================================================ MSDP Source-Active Local Cache - 12 entries (5.12.5.100, 224.7.5.0), RP 5.5.5.5 (5.12.5.100, 224.7.6.0), RP 5.5.5.5 (5.12.5.100, 224.7.7.0), RP 5.5.5.5 (5.12.5.100, 224.7.8.0), RP 5.5.5.5 (5.13.7.100, 224.8.5.0), RP 5.5.5.5 (5.13.7.100, 224.8.6.0), RP 5.5.5.5 (5.13.7.100, 224.8.7.0), RP 5.5.5.5 (5.13.7.100, 224.8.7.0), RP 5.5.5.5 (5.13.7.100, 224.8.7.0), RP 5.5.5.5 (7.14.8.100, 224.9.6.0), RP 5.5.5.5 (7.14.8.100, 224.9.7.0), RP 5.5.5.5 (7.14.8.100, 224.9.8.0), RP 5.5.5.5
Variable definitions
The following table defines parameters for the show ip msdp sa-cache command.
Variable |
Value |
---|---|
group{A.B.C.D} |
Displays all SA cache entries that match the group IP address. |
local |
Displays the local SA cache. |
rp{A.B.C.D} |
Displays all SA cache entries that match the RP IP address. |
source{A.B.C.D} |
Displays all SA cache entries that match the source IP address. |
vrf WORD<0–16> |
Displays configuration information for a particular VRF. |
vrfids WORD<0–512> |
Displays configuration information for a particular VRF ID. |