View BGP Configuration
View information about the BGP configuration.
Procedure
Example
================================================================================ BGP Configuration - VRF vrf1 ================================================================================ BGP version - 4 local-as - 22610 Identifier - 27.82.217.1 BGP on/off - ON as-4-byte - disable as-dot - disable aggregation - enable always-cmp-med - disable auto-peer-restart - enable auto-summary - enable comp-bestpath-med-confed - disable default-local-preference - 100 default-metric - -1 deterministic-med - disable flap-dampening - disable debug-screen - Off global-debug - none ibgp-report-import-rt - enable ignore-illegal-rtrid - enable max-equalcost-routes - 1 no-med-path-is-worst - enable route-refresh - disable orig-def-route - disable orig-v6-def-route - disable quick-start - disable synchronization - enable --More-- (q = quit)
Variable Definitions
The following table defines parameters for the show ip bgp conf command.
Variable |
Value |
---|---|
vrf WORD<1–16> |
Specifies a VRF instance by name (the string length ranges from 1–16 characters). |
vrfids WORD<0–512> |
Specifies a range of VRFs by ID number (the ID ranges from 0–512). |