Configure Resource Usage Counter for IPv6 Mroute

Configure the resource usage counters to query the number of ingress and egress IPv6 multicast streams traversing the switch. After you configure the counter thresholds for ingress and egress records, if the record usage goes beyond the threshold, you receive notification through a trap on the console, a logged message, or both.
Important

Important

If you do not configure the thresholds, EDM displays only the ingress and egress records that are currently in use.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Select IPv6 Mroute.
  3. Select the Resource Usage tab.
  4. Configure the ingress and egress thresholds.
  5. Configure the notification methods.
  6. Select Apply.

Resource Usage Field Descriptions

Use the data in the following table to use the Resource Usage tab.

Name

Description

Ingress Records In-Use

Displays the number of ingress records (source or group) traversing the switch.

Egress Records In-Use

Displays the number of egress records traversing the switch.

Ingress Threshold

Configures the ingress threshold level (0–32767).

Egress Threshold

Configures the egress threshold level (0–32767).

SendTrapAndLog

Sends both trap and log notification messages after the number of streams exceeds a threshold level.

SendTrapOnly

Sends only trap notification messages after the number of streams exceeds a threshold level. You can configure only one notification type.

LogMsgOnly

Sends only log notification messages after the number of streams exceeds a threshold level.