For administrative and troubleshooting purposes, sometimes you
must flush the routing tables. You can use EDM to flush the routing
tables by VLAN or flush them by port. Use this procedure to flush
the IP routing table for a port.
About this task
To flush routing tables by port for a VRF instance, first select
the appropriate instance.
Procedure
- In the Device Physical View, select a port.
-
In the navigation pane, expand
.
-
Select General.
-
Select the Interface
tab.
- In the Action section, select flushAll.
In a port context, all entries associated with the port are flushed.
You can flush the ARP entries and IP routes for a port.
After you flush a routing table, it is not automatically repopulated.
The repopulation time delay depends on the routing protocols in use.
-
Select Apply.
