Configure Vendor Option Data Globally

Before you begin

Define the vendor option.

About this task

Perform this procedure to configure DHCP vendor option data global parameters.

Note

Note

The switch follows inheritance and precedence rules for configured DHCP Server options. For more information, see DHCP Server.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Configure the vendor option data:

    ip dhcp-server vendor-option-data <1-255> value WORD<0-128>

Example

Configure the vendor option data:

Switch:1>enable
Switch:1#config t
Switch:1(config)#ip dhcp-server vendor-option-data 2 value 46
<cr>

Variable Definitions

The following table defines parameters for the ip dhcp-server vendor-option-data command.

Variable Definition

<1-255>

Specifies the vendor ID.

value WORD<0-128>

Specifies a value to apply to this vendor option.