View LLDP-MED Neighbor PoE PD Information

About this task

Perform this procedure to view PoE Powered Device (PD) information for remote LLDP-MED on specific ports.

Procedure

  1. In the navigation pane, expand Configuration > Serviceability > Diagnostics > 802_1ab.
  2. Select Port MED.
  3. Select the Neighbor PoE PD tab.

Neighbor PoE PD Field Descriptions

Use the data in the following table to use the Neighbor PoE PD tab.

Name

Description

TimeMark

Specifies the time filter. For more information about TimeFilter, see the TimeFilter textual convention in IETF RFC 2021.

LocalPortNum

Specifies the port on which the remote LLDP-MED information is received.

Index

Specifies the particular connection instance that is unique to the remote LLDP-MED.

PDPowerReq

Specifies the value of the power required by a PD LLDP-MED connected remotely to the port.

PDPowerSource

Specifies the power source being utilized by the PD LLDP-MED.

  • from PSE: specifies that the device advertises its power source as received from a PSE.

  • local: specifies that the device advertises its power source as local.

  • local and PSE: specifies that the device advertises its power source as using both local and PSE power.

PDPowerPriority

Specifies the priority of the PD LLDP-MED connected remotely to the port, for more information, see RFC 3621.

  • unknown — priority is not configured for the PD LLDP-MED

  • critical

  • high

  • low
9037809-01 Rev AA