View Route Information

View routes information to view the current configuration.

About this task

IPv6 host routes created for the IPv6 local interfaces do not display in the routing table.

Before you begin

Change the VRF instance as required to view route information on a specific VRF instance. Not all parameters are configurable on non-default VRFs.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Select IPv6.
  3. Select the Routes tab.

Routes Field Descriptions

Use the data in the following table to use the Routes tab.

Name

Description

Dest

Specifies the IPv6 destination network address. The prefix value must match the PrefixLength.

PfxLength

Specifies the number bits you want to advertise from the prefix. The prefix value must match the value in the Dest field.

Index

Specifies the unique value that identifies the route among the routes to the same network layer destination.

Interface

Specifies the interface to which this entry applies.

NextHop

Specifies the IPv6 address of the next hop on this route.

Protocol

Specifies the routing protocol, such as OSPF.

Metric

Specifies the metric assigned to this interface. The default value of the metric is the reference bandwidth or ifSpeed. The value of the reference bandwidth is configured by the rcOspfv3ReferenceBandwidth object.

For more information about reference bandwidth, see Globals Field Descriptions.

NextHopId

Identifier of the next-hop, hostname, or mac address.

Age

Specifies the number of seconds since the route was last updated or is last active.

Type

Specifies the type of route.

PathType

Specifies the type of path.

SrcVrfId

Specifies the source VRF instance.

Pref

Specifies the preference.