View Statistical Graph of Remote IS-IS Interface Sending Control Packets

About this task

Perform this procedure to view statistical graph of the remote IS-IS interface sending control packets.

Procedure

  1. In the navigation pane, expand Configuration > Fabric.
  2. Select IS-IS Remote.
  3. Select the Interfaces tab.
  4. Select an interface.
  5. Select the Graph button.
  6. Select the Interface Sending Control Packets tab.

Interface Sending Control Packets Field Descriptions

Use data in the following table to use the Interface Sending Control Packets tab.

Name

Description

Hello

Indicates the number of IS-IS Hello (IIH) PDUs seen in this direction at this level. Point-to-Point IIH PDUs are counted at the lowest enabled level: at L1 on Layer 1 or L1L2 circuits, and at Layer 2 otherwise.

LSP

Indicates the number of IS-IS LSP frames seen in this direction at this level.

CSNP

Indicates the number of IS-IS Complete Sequence Number Packet (CSNP) frames seen in this direction at this level.

PSNP

Indicates the number of IS-IS Partial Sequence Number Packets (PSNPs) seen in this direction at this level.

AbsoluteValue

Displays the counter value.

Cumulative

Displays the total value since you opened the Stats tab.

Average/Sec

Displays the average value for each second.

Minimum/Sec

Displays the minimum value for each second.

Maximum/Sec

Displays the maximum value for each second.

Last Val/Sec

Displays the last value for each second.