Display Foreign Sources for the Gateway

About this task

Use the following procedure to display the Gateway foreign source database. Foreign sources are originally learned from MSDP or statically configured on the Controller.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select SPB-PIM-GW.
  3. Select the Gateway-Foreign-Source tab.

Gateway-Foreign-Source Field Descriptions

Use the data in the following table to use the Gateway-Foreign-Source tab.

Name

Description

SourceAddress

Displays the foreign source IP address.

GroupAddress

Displays the multicast group IP address associated with the foreign source.

ControllerSysId

Displays the system ID of the controller node that sends this foreign source.

ControllerHostName

Displays the host name of the controller node that sends this foreign source.

GatewaySysId

Displays the system ID of the node selected as the gateway for this foreign source.

GatewayHostName

Displays the host name of the node selected as the gateway for this foreign source.

InVid

Displays the VLAN ID of the SPB-PIM Gateway interface through which the source of this source is reachable.

InPort

Displays the physical interface through which the source of this source is reachable.

OwnerType

Displays if the owner is MSDP or static.