Clear Fabric RSPAN (Mirror to I-SID) Statistics

Use the following procedure to clear Fabric RSPAN (Mirror to I-SID) statistics of packets mirrored into the specified mirroring I-SID or all mirroring I-SIDs on the BEB.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enter the following command:

    clear isid-mirroring stats monitor-isid-offset WORD<1–1024>

    Note

    Note

    You must use this command on the Mirroring BEB to clear the statistics of packets mirrored into I-SID.

Example

Switch:1>enable
Switch:1#configure terminal

Clear all Fabric RSPAN statistics:

Switch:1(config)# clear isid-mirroring stats 

Clear all Fabric RSPAN (Mirror to I-SID) statistics of packets mirrored into the specified mirroring I-SID

Switch:1(config)# clear isid-mirroring stats monitor-isid-offset 1

Variable Definitions

The following table defines parameters for the clear isid-mirroring stats command.

Variable

Value

monitor-isid-offset WORD<1–1024>

Specifies the offset ID that is mapped to the actual monitor I-SID where packets are mirrored.

Monitor I-SID = base monitor I-SID + offset ID.

The range of the monitor-isid-offset is 1 to 1000.

The base monitor I-SID is 16776000.