View Primary IP Addresses

Use this procedure to view primary IP addresses (and their associated router interfaces) from one central location.

About this task

You can also use this tab to configure a name or MAC offset for the interface.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select IP.
  3. Select the Primary Addresses tab.

Primary Addresses Field Descriptions

Use the data in the following table to use the Primary Addresses tab.

Name

Description

Interface

Specifies the router interface.

Ip Address

Specifies the IP address of the router interface.

Net Mask

Specifies the subnet mask of the router interface.

BcastAddrFormat

Specifies the IP broadcast address format used on this interface; that is, whether 0 (zero) or one is used for the broadcast address. The switch uses 1.

ReasmMaxSize

Specifies the size of the largest IP packet that this interface can reassemble from incoming fragmented IP packets.

VlanId

Identifies the VLAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN tag.

BrouterPort

Indicates whether this is a brouter port (as opposed to a routable VLAN).

MacOffset

Specifies a number by which to offset the MAC address of the VLAN from the chassis MAC address. This ensures that each IP address has a different MAC address.