View IPv6 Address Bindings

About this task

View the IPv6 address bindings that IP Source Guard (IPSG) allows.

Procedure

To enter User EXEC mode, log on to the switch.
View the allowed IPv6 address bindings:

show ipv6 source-guard binding [WORD<0-46>] [interface gigabitEthernet {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}]

Example

View the IPv6 address bindings for port 1/3.

Switch:1>show ipv6 source-guard binding interface gigabitEthernet 1/3
Slot/Port    IPv6  Address
==========================================================
1/3          2001::10:10:0:1
1/3          fe80::210:94ff:fe00:550b
-----------------------------------------------------------

View the IPv6 address bindings for a specific IPv6 address.

Switch:1>show ipv6 source-guard binding fe80::210:94ff:fe00:550b
Slot/Port    IPv6  Address
==========================================================
1/3          fe80::210:94ff:fe00:550b
-----------------------------------------------------------

Variable Definitions

The following table defines parameters for the show ipv6 source-guard binding command.


Variable	Value
`WORD<0-46>`	Identifies the IPv6 address.
interface gigabitEthernet `{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}`	Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.