ZTP+ Considerations

The following considerations apply to Zero Touch Provisioning Plus (ZTP+) :

• Fabric configurations are not supported with ZTP+. After ZTP+ is configured, ExtremeCloud IQ Site Engine server can use Simple Network Management Protocol (SNMP) to remotely configure Fabric-related configurations on the switch using SNMP MIBs.

• Only the Out-of-Band (OOB) port or the Management VLAN interface are used to connect the ExtremeCloud IQ Site Engine server.

  

  Note

  ZTP+ cannot change the Management VLAN interface. If onboarding started on the Management onboarding VLAN, this cannot be changed while using ZTP+.