Display the SPB-PIM Gateway Neighbor Information
Use the following procedure to display the SPB-PIM Gateway interfaces neighbor information.
Procedure
Example
Switch:1>show ip spb-pim-gw neighbor ============================================================================= Spb-pim-gw Neighbor - GlobalRouter ============================================================================= INTERFACE ADDRESS UPTIME EXPIRE Vlan26 26.1.1.10 0 day(s), 00:11:36 0 day(s), 00:01:28 Total SPB-PIM-GW Neighbors Displayed = 1/1 -----------------------------------------------------------------------------
Variable definitions
The following table defines parameters for the show ip spb-pim-gw neighbor command.
Variable |
Value |
---|---|
vrf WORD<1-16> |
Displays the SPB-PIM Gateway interface neighbor information for a specific VRF name. |
vrfids WORD<0-512> |
Displays the SPB-PIM Gateway interface neighbor information for a range of VRF IDs.
Note:
Enter a single VRF ID or multiple VRF IDs separated by ‘,‘ or enter a range of VRF IDs ‘x-y‘. |