View RSMLT Information

Show RSMLT information to view data about all RSMLT interfaces. The output of the command includes IPv6 information for the local and peer nodes.

About this task

If you use the show ip rsmlt command after you delete an RSMLT, the RSMLT still shows in the command output until you restart the switch.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Show RSMLT information about the interface:

    show ip rsmlt [local|peer] [vrf WORD<1-16>] [vrfids WORD<0-512>]

  3. View the status of the switch to act as a peer forwarder:

    show ip rsmlt edge-support

Examples

Switch:1>show ip rsmlt 

================================================================================
                       Ip Rsmlt Local Info - GlobalRouter
================================================================================

VID   IP              MAC                ADMIN   OPER  HDTMR  HUTMR   
--------------------------------------------------------------------------------
101   101.1.1.32      00:24:7f:9e:da:01  Enable  Up    100    200     
102   102.1.1.32      00:24:7f:9e:da:02  Enable  Up    60     180     

VID   SMLT ID                             
--------------------------------------------------------------------------------
101    101                                 
102    102                                 

VID   IPv6            MAC                ADMIN   OPER  HDTMR  HUTMR   
--------------------------------------------------------------------------------
101                   00:24:7f:9e:da:01  Enable  Up    100     200     
      1010:0:0:0:0:0:0:0/64 
      1010:0:0:0:0:0:0:32/64 
      fe80:0:0:0:224:7fff:fe9e:da01/128 
102                   00:24:7f:9e:da:02  Enable  Up    60     180     
      1020:0:0:0:0:0:0:0/64 

      1020:0:0:0:0:0:0:32/64 
      fe80:0:0:0:224:7fff:fe9e:da02/128 

VID   SMLT ID                             
--------------------------------------------------------------------------------
101    101                                                                   
102    102                                                                   


================================================================================
                       Ip Rsmlt Peer Info - GlobalRouter
================================================================================

VID   IP              MAC                ADMIN   OPER  HDTMR  HUTMR   
--------------------------------------------------------------------------------
101   101.1.1.33      00:24:7f:9e:ea:01  Enable  Up    100     200     
102   102.1.1.33      00:24:7f:9e:ea:00  Enable  Up    60     180     

VID   HDT REMAIN  HUT REMAIN  SMLT ID                             
--------------------------------------------------------------------------------
101   60          180         101                                 
102   60          180         102                                 

VID   IPv6            MAC                ADMIN   OPER  HDTMR  HUTMR   

--------------------------------------------------------------------------------
101                   00:24:7f:9e:ea:01  Enable  Up    100     200     
      1010:0:0:0:0:0:0:0/64 
      1010:0:0:0:0:0:0:33/64 
      fe80:0:0:0:224:7fff:fe9e:ea01/128 
102                   00:24:7f:9e:ea:00  Enable  Up    60     180     
      1020:0:0:0:0:0:0:0/64 
      1020:0:0:0:0:0:0:33/64 
      fe80:0:0:0:224:7fff:fe9e:ea00/128 

VID   HDT REMAIN  HUT REMAIN  SMLT ID                             
--------------------------------------------------------------------------------
101   60          180         101                                                                   
102   60          180         102                                                                   


Switch:1>show ip rsmlt edge-support

RSMLT Peer Info:
        rsmlt-peer-forwarding : disable

Variable definitions

Use the data in the following table to use the show ip rsmlt command.

Variable

Value

local

Shows local RSMLT information.

peer

Shows RSMLT information for the peer.

vrf WORD<1-16>

Shows information for a specific VRF name.

vrfids WORD<0-512>

Shows information for a specific VRF ID.