Configure Ingress Policer and Port Rate Limiter

Perform this procedure to limit the number of packets that can be attached to an ACL ACE. If you want to modify the ingress bandwidth rate limiter values, you must first disable the ACE.
Note

Note

You can attach one policer to ACL and ACE. Every policer is independent.

Before you begin

Ensure that both the ACL and the ACE exist.

Procedure

  1. In the navigation pane, expand Configuration > Security > Data Path.
  2. Select Advanced Filters (ACE/ACLs).
  3. Select the appropriate ACL.
  4. Select the appropriate ACE.
  5. Select Policer.
  6. Select Insert.
  7. For SvcRateValue, type the service rate value.
  8. For PeakRateValue, type the peak rate value.
  9. Select Insert.
  10. Select Apply.