Enable or Disable ARP on a VLAN

Use the following procedure to enable ARP on VLAN level.

Procedure

  1. In the navigation pane, expand Configuration > VLAN.
  2. Select VLANs.
  3. Select the Basic tab.
  4. Select a VLAN.
  5. Select IP.
  6. Select the ARP tab.
  7. In DoProxy, select enable to enable the Proxy ARP function.
  8. In DoResp, select enable to configure the system to respond to an ARP. The default is enable.
  9. Select Apply.

    The ARP dialog box is available only if the port or VLAN is routed; that is, it is assigned an IP address.

ARP Field Descriptions

Use the data in the following table to use the ARP tab.

Name

Description

DoProxy

Configures the system to respond to an ARP request from a locally attached host or end station for a remote destination. The default value is disable.

DoResp

Configures the system to send ARP responses for this IP interface address. The default value is enable.