Configure RADIUS Server Reachability
About this task
Use this procedure to configure the RADIUS server reachability settings.
Procedure
- In the navigation pane, expand .
- Select RADIUS.
- Select the RADIUS Global tab.
- In RadiusReachability, select either useStatusServerPackets or useDummyRadiusRequests.
- In UserName, type the reachability user name.
- In Password, type the reachability password.
- In Confirm Password, retype the reachability password.
- In Unreachable Timer, type the interval in seconds between checks when the RADIUS server is unreachable.
- In KeepAlive Timer, type the interval in seconds between checks when the RADIUS server is reachable.
- Select the Apply.
RADIUS Global Field Descriptions
Use the data in the following table to use the RADIUS Global tab.
|
Name |
Description |
|---|---|
|
Enable |
Enables the RADIUS authentication feature globally. |
|
MaxNumberServer |
Specifies the maximum number of servers to be used inclusive. |
|
AccessPriorityAttrValue |
Specific to RADIUS authentication. Specifies the vendor-specific attribute value of the access-priority attribute to match the type value set in the dictionary file on the RADIUS server. The default is 192. |
|
AcctEnable |
Enables RADIUS accounting. |
|
AcctAttriValue |
Specific to RADIUS accounting. Specifies the vendor-specific attribute value of the CLI-command attribute to match the type value set in the dictionary file on the RADIUS server. This value must be different from the access-priority attribute value configured for authentication. The default value is 193. |
|
AcctIncludeCli |
Specifies whether you want CLI commands included in RADIUS accounting requests. |
|
ClearStat |
Clears RADIUS statistics from the device. |
|
McastAttributeValue |
Specifies the value of the Mcast attribute. The default value is 90. |
|
AuthInfoAttrValue |
Specifies the value of the authentication information attribute. The default value is 91. |
|
CommandAccessAttrValue |
Specifies the value of the command access attribute. The default value is 194. |
|
CliCommandAttrValue |
Specifies the value of the CLI command attribute. The default value is 195. |
|
AuthInvalidServerAddress |
Displays the number of access responses from unknown or invalid RADIUS servers. |
|
CliCmdCount |
Gives the value for the CLI command count. The default is 40. |
|
CliProfEnable |
Enables RADIUS CLI profiling. |
|
SupportedVendorIds |
Shows the vendor IDs that the software supports for RADIUS. |
|
RadiusReachability |
Specifies the mode for RADIUS reachability. Status-server mode provides a standard-compliant method for RADIUS reachability. Use-radius mode requires the configuration of dummy packets that are sent to RADIUS servers. The default is use-radius mode. |
|
SecureEnable |
Enable RADIUS Security (RADSec). |
|
UserName |
Specifies the username for RADIUS server reachability. The default is extremenetworks. |
|
Password |
Specifies the password for RADIUS server reachability. The default is extremenetworks. |
|
Confirm Password |
Confirms the password for RADIUS server reachability. |
|
Unreachable Timer |
Specifies, in seconds, the interval between checks when radius server is unreachable. The default is 60 seconds. |
|
Keep Alive Timer |
Specifies, in seconds, the interval between checks when radius server is reachable. The default is 180 seconds. |