View RADIUS Server Statistics

About this task

You cannot collect the following network statistics from a console port: the number of input and output packets, and the number of input and output bytes. All other statistics from console ports are available to assist with debugging.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display RADIUS server statistics:

    show radius-server statistics

  3. Clear server statistics:

    clear radius statistics

Example

Switch:1#show radius-server statistics 

Responses with invalid server address: 0

   Radius Server(UsedBy) : 192.0.2.58(cli)
--------------------------------------------------------
         Access Requests : 52
          Access Accepts : 0
          Access Rejects : 0
           Bad Responses : 52
          Client Retries : 52
        Pending Requests : 0
        Acct On Requests : 1
       Acct Off Requests : 0
     Acct Start Requests : 47
      Acct Stop Requests : 46
   Acct Interim Requests : 0
      Acct Bad Responses : 94
   Acct Pending Requests : 0
     Acct Client Retries : 94
       Access Challanges : 0
         Round-trip Time : 
          Nas Ip Address : 192.0.2.32
 
   Radius Server(UsedBy) : 192.0.2.58(snmp)
--------------------------------------------------------
         Access Requests : 0
          Access Accepts : 0
          Access Rejects : 0
           Bad Responses : 0
          Client Retries : 0
        Pending Requests : 0
        Acct On Requests : 0
       Acct Off Requests : 0
     Acct Start Requests : 0
      Acct Stop Requests : 0
   Acct Interim Requests : 0
      Acct Bad Responses : 0
   Acct Pending Requests : 0
     Acct Client Retries : 0
       Access Challanges : 0
         Round-trip Time : 
          Nas Ip Address : 192.0.2.32
 
--More-- (q = quit)