View RADIUS Server Information

If your system is configured with a RADIUS server you can display the RADIUS server information.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. To view the RADIUS server information enter the following command:
    show radius-server
    Note

    Note

    If no RADIUS server is configured, the system displays the following message:
    no RADIUS server configured

Example

Switch:1#show radius-server
=========================================================================================
                                    Radius Server Entries
=========================================================================================
                                                              SECURE  SECURE SECURE   SECURE   SECURE    ACCT ACCT    
NAME           USEDBY  SECRET PORT PRIO RETRY TIMEOUT ENABLED ENABLED MODE   INSTANCE PROFILE  LOG-LEVEL PORT ENABLED 
------------------------------------------------------------------------------------------------------------------------
192.0.2.14     cli     ****** 1812 10   1     8       true    true    tls    0        radsecp  error     1813 true    
192.0.2.15     cli     ****** 1812 10   1     8       true    false   tls    -1       default  error     1813 true