View IPv4 RSMLT Peer Information

About this task

Perform this procedure to view and edit RSMLT peer information.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select RSMLT.
  3. Select the Peer tab.

Peer Field Descriptions

Use the data in the following table to use the Peer tab.

Name

Description

IfIndex

IP interface identification.

VlanId

Specifies the VLAN ID of the chosen VLAN.

IpAddr

Specifies the IP address on the RSMLT VLAN.

MacAddr

Specifies the MAC address of the selected VLAN.

Enable

Displays the RSMLT operating status as enabled or disabled.

OperStatus

Displays the RSMLT operating status as either up or down. The default is down.

HoldDownTimer

Defines how long the recovering/restarting system remains in a non-Layer 3 forwarding mode for the peer router MAC address.

The range of this value is from 0 to 3600 seconds. The default is 0.

HoldUpTimer

Defines how long the RSMLT system maintains forwarding for its peer.

The value is a range from 0 to 3600 seconds or 9999. 9999 means infinity. The default is 0.

HoldDownTimeRemaining

Displays the time remaining of the HoldDownTimer. The default is 0.

HoldUpTimeRemaining

Displays the time remaining of the HoldUpTimer. The default is 0.

SmltId

Specifies the ID range for the Split MultiLink Trunk. A valid range is 1 to 32.

VrfId

Identifies the VRF.

VrfName

Indicates the VRF name.