View NTP Statistics

About this task

Use the show ntp statistics command to view the output for each NTP stratum regardless of whether authentication is enabled.

If two host names resolve to the same IP address, only the first one displays in the output for the show ntp statistics command.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View NTP statistics:

    show ntp statistics

Examples

Switch:1#show ntp statistics

              NTP Server : 192.0.2.187
------------------------------------------
                 Stratum : 16
                 Version : NTPv4
               Broadcast : No
            Auth Enabled : Disabled
             Auth Status : Not-Auth
             Sync Status : Rejected
            Reachability : Unreachable
              Root Delay : 0.000
               Root Disp : 0.000
                   Delay : 0.000
              Dispersion : 15937.500
                  Offset : 0.000
               Precision : -23
                  Jitter : 0.000
              Last Event : Mobilize

              NTP Server : 192.0.2.201
------------------------------------------
                 Stratum : 4
                 Version : NTPv4
               Broadcast : No
            Auth Enabled : Enabled
             Auth Status : Ok
             Sync Status : Candidate
            Reachability : Reachable
              Root Delay : 18.448
               Root Disp : 128.677
                   Delay : 18.448
              Dispersion : 0.366
                  Offset : 0.202
               Precision : -24
                  Jitter : 1.041
              Last Event : Popcorn