Configure Multicast Stream Limitation on an Interface

Configure multicast stream limitation to limit the number of concurrent multicast streams on the interface. By limiting the number of concurrent multicast streams, you can protect the bandwidth on a specific interface and control access to multicast streams.

About this task

You can configure the maximum number of streams independently. After the number of streams reaches the limit, the interface drops additional join reports for new streams. You can control the overall bandwidth usage in addition to restricting users from receiving more than a specific limit of multicast streams on an interface.

You can configure IGMP on a VRF instance the same way you configure the Global Router except that you must first launch the appropriate VRF context.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select IGMP.
  3. Select the StreamLimit tab.
  4. To change the status of an interface, double-click on the StreamLimitEnable field for the interface, and then select enable or disable from the menu. If the interface is enabled, you can edit the Maximum Number of Stream field.
  5. Select Apply.

StreamLimit Field Descriptions

Use the data in the following tab to use the StreamLimit tab.

Name

Description

Interface

Displays the slot and port number or VLAN ID for this interface.

StreamLimitEnable

Enables or disables stream limitation on this interface.

Maximum Number Of Stream

Configures the maximum number of streams allowed on this interface. The range is from 0–65535, and the default is 4.

Current Number Of Stream

Displays the current number of streams received on this interface. This value is a read-only value.