Display Foreign Sources for the Controller

About this task

Use the following procedure to display the foreign sources learned from MSDP or statically configured at the Controller.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select SPB-PIM-GW.
  3. Select the Controller-Foreign-Source tab.

Controller-Foreign-Source Field Descriptions

Use the data in the following table to use the Controller-Foreign-Source tab.

Name

Description

SourceAddress

Specifies the source IP address from a foreign multicast domain.

GroupAddress

Specifies the multicast group IP address associated with the foreign source.

GatewaySysId

Displays the system ID of the node selected as the Gateway for this foreign source. GatewaySysId field will have a valid value if the Gateway is assigned to a source. If the Gateway is not assigned to a source the value is 0.

GatewayHostName

Displays the host name of the node selected as the Gateway for this foreign source. GatewayHostName field will have valid values if the Gateway is assigned to a source. If the Gateway is not assigned to a source the value is NULL.

Type

Displays the owner type for this source.

Owner

Displays the IP address of the MSDP peer if the foreign source is MSDP.