Configure an NTP Server for a DHCP Server Subnet

Use this procedure to configure an NTP server address to advertise to clients within a DHCP Server subnet.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select DHCP Server.
  3. Select the Subnet NTP tab.
  4. Select Insert.
  5. In Subnet IP, type the subnet network address.
  6. In Subnet Mask, type the subnet mask.
  7. In IP, type the IPv4 address of the NTP server.
  8. Select Insert.

Subnet NTP Field Descriptions

Use the data in the following table to use the Subnet NTP tab.

Name Description

Subnet IP

Specifies the network address of the DHCP subnet.

Subnet Mask

Specifies the subnet mask for the DHCP subnet.

IP

Specifies the IPv4 address for the NTP server that you want to assign to this subnet. You can assign up to eight NTP servers to a subnet.